Home > Airhead > Custom > Siebenrock > Siebenrock Engine >

Oil Cooler Upgrade Kit - BMW Airhead  / Siebenrock
R65GS oil cooler,R80GS oil cooler,R80G/S oil cooler,R80GS PD oil cooler,R80ST oil cooler,R100GS oil cooler,R100GS PD oil cooler,R100R oil cooler
 
Part #: Cooler400

Oil Cooler Kit - this upgrade is worth fitting if you are installing a larger bore cylinder. to reduce engine temperature.

The light weight cooler is fitted to the center cross-member on the frame under the steering head. The kit includes the hoses, filter guide tube, oil filter, associated gaskets/seals, horn extension wiring and installation instructions.


Vehicle Manufacturer: BMW
Application: BMW Airhead Models
Make/Model: BMW R65GS, R80GS, R80G/S, R80GS PD, R80ST, R100GS, R100GS PD, R100R
Model Years: 1980 - 1996
Manufacturer #: Siebenrock 142400

(See APPLICATION TABLE tab BELOW to verify vehicle fitment)

Brand :

USD Price $655.00

Quantity in Stock:15

Part #: COOLER400
Quantity:

Description
 		Application Table
 
INSTALLATION INSTRUCTIONS

  • Place an oil pan or something similar under your engine before dismantling the bike.
  • Drain the oil from the engine oil sump
  • Mount the bracket with the clamp for the oil cooler in the center of the frame cross-member using the two enclosed M8x20 bolts and M8 washers.
  • Pull the clamp though before tightening it and mount the oil cooler on the pre-assembled bracket with the hose connections poingts facing downwards.
  • Using the two M6x20 bolts and M6 attach the oil cooler ensuring that the off-centre mount is rotated and facing forwards
  • Remove the oil filter and catch any remaining oil.
  • Replace the guide tube in the middle with the tube supplied - using a high-strength thread locker.
  • Note that the guide tube must protrude the housing by 3mm.
  • Install the oil filter and mount the new oil cover.
  • When installing the paper gasket and oil seal refer to the sequence shown on the paper installation instructions - the paper gasket is optional.
  • Now the hoses can be installed, routing the longer hose to the left-hand side of the vehicle
  • Screw the two oil hoses directly onto the oil cooler from below and tighten firmly.
  • Install the the two banjo bolts on the oil cover and tighten between 17-20 Nm.
  • Now align the oil cooler and the tighten the clamp.
  • Ensure that teh hoses and cooler do not interfere with the freedom of movement of the mudguard.
  • Secure the two hoses with the enclosed cable ties to ensure there is no contact with the
  • Extend the horn wiring harness using the enclosed wire and heat shrink hose and connectors to mount the horn on the left side.
  • Insert oil and top-up the oil after a short warm-up period ensuring that the new system is filled.

Related Products
Oil Filter Cover for Oil Cooler WITH Bypass hole - BMW R80, R100; 11 42 1 338 511 / EnDuraLast Power Replacement Kit 1000cc - BMW R100 Models 1980-1995/ Siebenrock Oil Pan Gasket - BMW Airhead; 11 13 1 338 427  / EnDuraLast Oil Pan Extension - BMW Airhead; 11 13 1 338 427  / Siebenrock
USD Price $56.99

Add Free Shipping
USD Price $1,599.99

Add
USD Price $7.99

Add
USD Price $195.75

Add
11 42 1 338 511,11421338511,R80 Oil Filter Cover for Oil Cooler, R100 Oil Filter Cover for Oil Cooler 1100103,R100R piston kit,R100CS piston kit,R100RS piston kit,R100RT piston kit,R100RT piston kit,R100GS piston kit,R100R piston kit 11 13 1 338 427,11131338427,11 13 1 337 330,11131337330,oil pan gasket,pan gasket,bmw oil pan gasket,airhead oil pan gasket,R45 oil pan gasket,R50 oil pan gasket,R60 oil pan gasket,R65 oil pan gasket,R75 oil pan gasket,R80 oil pan gasket,R90 oil pan gaske 11 13 1 338 427,11131338427,11 13 1 337 330,11131337330,R45 oil pan spacer,R60 oil pan spacer,R65 oil pan spacer,R75 oil pan spacer,R80 oil pan spacer,R90 oil pan spacer,R100 oil pan spacer,R45 oil pan extender,R60 oil pan extender,R65 oil pan extender,R7



Engine Oil 4T SYNTH 10W-60 RACE 4L / LIQUI MOLY
Quick Disconnect Fuel Hose Coupling Kit (6 Piece) for 5/16" hoses - BMW HP2 / INSYNC
S/S Braided Clutch Hose BMW R850RT, R1150RT; 21 52 7 663 712 / GoodRidge
Stainless Steel Karkoma Fuel Cock Hose Connector - BMW Airhead ; 16 12 1 233 366 / EnDuraLast
Engine Oil 4T SYNTH 10W-60 RACE 4L / LIQUI MOLY
Quick Disconnect Fuel Hose Coupling Kit (6 Piece) for 5/16" hoses - BMW HP2 / INSYNC
S/S Braided Clutch Hose BMW R850RT, R1150RT; 21 52 7 663 712 / GoodRidge
Stainless Steel Karkoma Fuel Cock Hose Connector - BMW Airhead ; 16 12 1 233 366 / EnDuraLast
$94.95
$106.50
$223.75
$14.99