Stainless Steel Braided Hose between the Rear Master Cylinder and Caliper.
NOTE: The banjo end of the hose must be installed first, then the female end. Female ends are normally connected to a hard line which has a swiveling male fitting, however the female end may also rotate.
Vehicle Manufacturer: BMW
Application: BMW Oilhead Models
Make/Model: BMW: R850GS, R1100GS
Model Years: 1993 - 2006
Manufacturer #: 34 32 2 314 555
Dimensions: L = 400mm
(See APPLICATION TABLE tab BELOW to verify vehicle fitment)