Home > C Scooter > Tools & Fasteners >

Pocket Tire Repair Kit / Stop&Go
tire repair kit, stop&go,stop&go 1000,Pocket Tire Plugger plus CO2 Inflation,tire repair,puncture repair,puncture,emergency
 
Part # TRK-1000

The Tire Repair Kit can be applied to all Tubeless Tires.

The kit includes all the tools your require to repair a puncture, however you must provide your own system/tools for inflating the tire.

This is considered a temporary repair on all street vehicles. "On the Wheel" repairs are classified as emergency only. The tire must not be run more than 100 miles at speeds no greater than 50 m.p.h. until the tire is dismounted, inspected, and permanently repaired or replaced.

You should never leave home without this tool kit!

Brand :
EME Price $35.95

Part #: TRK-1000
Qty:

Description
 
Instructions for Use of the Pocket Tire Plugger

1. Locate and Clean Damage Area
Locate puncture and remove damaging item. If unable to locate, apply an non-carbonated liquid to the tire to observe air bubbles indicating loss of air. Once identified, dry the puncture area.

2. Inspect and Ream Hole
Use the Rasp Tool to ream out the puncture. If you feel metal against metal you are coming in contact with a steel belt. If so, ream out extra good to effectively take away any jagged edges from the metal belt.

3. Load Plug into Plugger Tool
Hold the threaded end of the Plugger firmly upright. Set plug in barrel with mushroom head facing up. Hold Nozzle in other hand upside/down and use the tip of Nozzle to recess the mushroom head down into the Plugger. The mushroom head should invert down into barrel just below the tip of threads.

4. Install Nozzle in Tire
Screw the Nozzle onto the Probe Tool. Use this tool to install the Nozzle all the way into the puncture. Now hold the Nozzle firmly as you unscrew the Probe Tool away from the tire. The Nozzle stays in the tire.

5. Install Plug in Tire
Screw the Tire Plugger onto the Nozzle in tire all the way. Insert the Hex Wrench into the bottom of Plugger. Turn Wrench clockwise until it stops. When the Wrench stops turning the Plug is all the way out in the tire. Now unscrew the Wrench until it is at the bottom of the Plugger. Pull the Plugger and Nozzle away from the tire.

6. Seat Mushroom Head
Use pliers (not included) to grip Plug stem firmly. Pull on the stem until is stretches about 2 inches. This will effectively seat the mushroom head on the inner wall of tire.

7. Re-inflate tire and Trim Stem
Re-inflate tire to proper pressure. Use enclosed blade to trim the stem of plug level with the tire tread. Do not pull on stem while trimming.
Details: No rubber cement or lubricant is necessary. Place open bag of plugs in zip-lock bag to keep them lubricated. Do not attempt to repair puncture greater than 5/16th inch (7mm). This is considered a temporary repair on all street vehicles. "On the Wheel" repairs are classified as emergency only. The tire must not be run more than 100 miles at speeds no greater than 50 m.p.h. until the tire is dismounted, inspected, and permanently repaired or replaced.

Related Products
Pocket Tire Repair Mushroom Plugs / Stop&Go Air Compressor for Motorcycles, Scooters, & ATV's / Stop&Go Black Mamba Disposable Nitrile Gloves - 10 Pk - Size Large / Black Mamba Pen Type Portable Multimeter / EnDuraLast
EME Price $8.00

Add
EME Price $36.95

Add
EME Price $2.99

Add
BUY NOW $29.99

Add
tire repair kit, stop&go,stop&go 1000,Pocket Tire Plugger plus CO2 Inflation,tire repair,puncture repair,puncture,emergency 71 11 2 332 083, 71112332083,tire repair kit, stop&go,stop&go rcp,Puncture for Motorcycles, Scooters, & ATV's,tire repair,puncture repair,puncture,emergency,compressor,battery operated compressor gloves, disposable gloves, 10 pack of gloves, nitrile gloves, nitrile, black glove, mechanic glove, oil change glove, painting glove, battery glove, fluid resistant glove, EDL-MultimeterPen, Digital Multimeter, multimeter, diode, voltage, current, alternating current, AC,DC, non-contact, testing, circuit test, circuit, continuity, MS8211D, volt meter, voltage meter, ohm meter, diode meter, diode reader, diode tester,
Points Adjust Tool w/ Feeler Gauge - BMW R Airhead ; 12 11 1 353 640 / Northwoods Airheads Black Cargo Net for All Motorcycles ; 6 Hook - 15" x 15" x 0.2" / EnDuraLast Exhaust Nut Removal / Installing Wrench - BMW R Airhead ; 83 30 0 401 758 / EnDuraLast Leather Retro Motorcycle Goggles - EMGO
EME Price $28.00

Add
BUY NOW $4.99

Add
EME Price $20.00

Add
EME Price $29.99

Add
12 11 1 353 640, 12111353640, points adjust tool, airhead tool, ignition tool, bmw r points tool, northwoods airheads tool, beemer ignition tool, points tool, /5 tool, bmw /5 tool, bmw tool, airhead points tool, Motorcycle cargo net, Topeak cargo net, Paul Jr. Bungee Cord, BikeMaster Black Stretch, Bungee net, ATV Net, Motorcycle Net, Bike Net, Cargo Net 83 30 0 401 758, 83300401758, exhaust wrench, nut wrench, bmw nut removal tool, bmw wrench, bmw exhaust nut wrench, wrench for bmw airhead exhaust, r100 wrench, r80 wrench, r65 wrench, r75 wrench, nut removal tool, bmw wrench, airhead nut wrench Motorcycle Goggles, Goggles, eye protection, glasses, eyewear, Vintage Motorcycle Goggles with Anticrash Squared Lenses - Steel Profile, Retro goggles, retro eyewear, vintage look, 76-50122
Wheel Speed Sensor - BMW F650, F800, G650, HP2 & R1200S ; 34 52 7 687 528 / Bosch
EME Price $29.99

Add
34 52 7 687 528, 34527687528, 0 265 007 684, 0265007684, Bosch sensor, bosch part # 0 265 007 684, Wheel Speed Sensor,BMW F650, F800, G650, HP2 & R1200S, F650 Wheel Speed Sensor, F800 Wheel Speed Sensor , G650 Wheel Speed Sensor , HP2  Wheel Speed Sensor