|
|
|
|
For precise performance over a long service life, use BOSCH Oxygen Sensors; - Standard narrow band type Oxygen Sensors operate between 0 and 1 volts, and are only capable of accurately measuring a stoichiometric air/fuel ratio (e.g. 14.7:1).
- A richer or leaner condition results in an abrupt voltage change and is only useful for qualitative determination.
- Modern vehicle use "switch" like sensing at idle and part throttle to make small compensations in fuel delivery to keep the air/fuel ratio near 14.7:1.
- Universal 4-wire heated sensor
- OE fit and function.Plug and Play Connector.
- Correct connection for plugging into vehicle harness.
- Reduces emissions and may also increase gas mileage.
- Lead length = 24 inches / 610 mm (from sensor to connector)
- Bosch Universal Heated Oxygen Sensors are an economical alternative for your fuel injected BMW and Moto Guzzi and other applications.
- Bosch Universal Heated Oxygen Sensors provide the closest match to the original equipment manufacturer's sensor performance.
- Each sensor is manufactured with a two-foot (610 mm) length of sensor wire to allow maximum replacement of worn wire. Includes heat resistant Posi-Lock connectors for quick and easy connection to the original vehicle equipment wire harness connector for a fraction of the cost of the Dealer item.
- Reduces emissions and may also increase gas mileage
- With water-proof and heat resistant Posi-Lock connector to splice into original vehicle harness connector.
|
|
|
|
|
|
Related Products |
Remanufactured Alternator (33 Amp) - BMW K1, K75, K100, K1100 ; 12 31 2 305 316 / BOSCH
|
|
Spark Plug Wire Set - BMW K1, K1100; 12 12 2 305 041, 042, 043, 044 / EnDuraLast
|
|
Starter - BMW K Bike ; 12 41 1 459 007, 12 41 8 525 345 / EnDuraLast
|
|
Ignition Coil - BMW K1, K100, K1100; 12 13 1 459 890, 12 13 1 459 513 / EnDuraLast
|
|
|
|
|
|
|
|
|
|
Ignition Hall Effect Trigger Sensor - BMW K100, K1100, K1; 12 11 1 459 033 / BOSCH
|
|
|
|
|
|
|
|
|
|
|
|