Input Oil Seal for the Front of the 5 Speed Gearbox.

NOTE: Be sure to insert the seal carefully so the lip does not roll or get cut on the splines - use slip sleeve if needed. The 1981 and later models have a input seal on the opposite end of the input shaft - see: GearboxSeal522. In the event that this seal is installed incorrectly and/or is leaking, then oil may flow through the input shaft and leak into the spline area making it appear as if the GearboxSeal726 is leaking.

Vehicle Manufacturer: BMW
Application: All BMW Airhead Models
Make/Model: BMW R45, R50, R60, R65, R75, R80, R90, R100
Model Years: 1969 - 1996
Manufacturer #: 23 12 1 338 726
Dimensions - 40mm x 26mm x 9mm
NOTE: For 5 speed gearbox

(See APPLICATION TABLE tab BELOW to verify vehicle fitment)

Brand :