Home > Oilhead > Engine & Drivetrain > Final Drive >

Final Drive to Swing Arm Bearing Upgrade Kit BMW Oilhead; 33 17 2 312 563, 33 17 2 311 091 / EI
33 17 2 312 563,33172312563,33 17 2 335 118,33172311091,33 17 2 335 118,33172311091,R850 swing arm bearing ,R1100 swing arm bearing ,R850 final drive bearing ,R1100 final drive bearing,final drive bearing
Alternative Views:

Part # FDBearingKit563

Final Drive to Swing Arm Bearing and Bush upgrade Kit.

The bushes can be greased externally with removable grease nipples.

Bolt = M30P1.5, Stud & Nut = M24P1.5

FDBearingKit118 for kit that fits the R1100S

See Technical Specs below for Fitting Instructions.

Vehicle Manufacturer: BMW
Application: BMW Oilhead Models
Make/Model: BMW R850GS, R850R, R850RT, R1100GS, R1100R, R1100RS, R1100RT (does not fit R1100S)
Model Years: 1992 - 2006
Manufacturer #: 33 17 2 312 563, 33 17 2 311 091

(See APPLICATION TABLE tab BELOW to verify vehicle fitment)

Brand: Emerald Island
BMW List Price $283.19
USD Price $129.00

Quantity in Stock:1


Technical Specs Application Table

Replace the wear and failure prone final drive pivot bearings with this well engineered bushing upgrade kit. No modifications required, this bolt on kit improves ease of maintenance with the integrated grease fittings to ensure durability and long life. Fits where the swingarm attaches to the final drive on Paralever models.

The bushes are made from hard anodized, aircraft grade aluminum alloy for strength, and include copper bushes for longevity.

Follow factory shop manual for removal directions. Install new bushings in final drive housing. Housing can be heated and bushings chilled in a freezer for easier installation. Apply a thin film of moly lube to inside of bushings. Do not pack the bushing full of grease as this could cause the bushing cup to crack due to hydraulic lock as you tighten the adjuster pin. Torque the fixed pin to 80 Ft Lbs (108.2 Nm)
with Blue Loctite #242 applied to threads.Tighten adjusting pin only until absence of free play, do not overtighten adjusting pin as this can cause binding and wear in bushing cup. Tighten locknut to 80 Ft Lbs (108.2 Nm) with blue Loctite #242 applied to threads. Use moly based chassis lube in your grease gun for future lubrication. Lube every 12,000 miles or sooner if desired. Only use supplied grease fittings for lubing the bushings, remove grease fittings and install supplied bolts after lubrication.

Installation of this Bearing Kit

Related Products
Final Drive Fixed Pivot BMW K Bike, Oilhead; 33 17 2 335 118 / EnDuraLast Final Drive Pinion Ring BMW Airhead, Hexhead, K Bike, Oilhead ;  33 11 7 701 691 / EnDuraLast Final Drive Cover Plate Gasket BMW Airhead;  33 11 2 311 097 / EnDuraLast Final Drive Pinion Bearing BMW Airhead, K Bike, Oilhead;  33 12 1 236 995, 33 12 1 236 998 / EnDuraLast
BUY NOW $33.50

USD Price $19.00

USD Price $5.75

USD Price $33.99

2335118,33 17 2 335 118,33172335118,K1200 pivot pin,R850 pivot pin,R1100 pivot pin,R1150 pivot pin,K1200 final drive pivot pin,R850 final drive pivot pin,R1100 final drive pivot pin,R1150 final drive pivot pin,K1200 swing arm pivot pin,R850 swing arm pivo 33 11 7 701 691, 33117701691, compression ring bmw motorcycle, r80, r100, k1, k75, k100, k1100, K1200, k1300, r850, r1100, r1150, r1200, hp2, r900, r ninet, hexhead, oilhead, airhead, k bike, parts bmw k, parts bmw r, bearing, pinion, pinion bearing, BEVE 33097,33 11 2 311 097,33112311097,R45 final drive cover gasket,R65 final drive cover gasket,R80 final drive cover gasket,R100 final drive cover gasket,R45 final drive gasket,R65 final drive gasket,R80 final drive gasket,R100 final drive gasket 33995,25435,33 12 1 236 998,33121236998,K1 final drive bearing,K75 final drive bearing,K100 final drive bearing,K1100 final drive bearing,K1200 final drive bearing,R45 final drive bearing,R65 final drive bearing,R80 final drive bearing,R100 final drive
Final Drive Spline Grease - 15grams / EnDuraLast Final Drive Cover Plate ORing BMW Airhead, K Bike, Oilhead;  33 11 1 241 257 / EnDuaLast Crush Washer, Miscellaneous 15.5 x 12mm - BMW Airhead, K Bike; 07 11 9 963 130 / EnDuraLast Final Drive Boot - BMW Airhead, Oilhead & K Bike; 33 17 1 452 504 / EnDuraLast
BUY NOW $8.50

USD Price $3.99

USD Price $0.50

USD Price $34.99

Better than Staburags NBU 30 PTM, Honda Moly, Loctite anti seize moly, BMW #10, for lubricating spline, final drive, output shaft, as part of the regular maintenance, enduralast, kit 43230,33 11 1 241 257,33111241257,K1 Final Drive O-Ring,K75 Final Drive O-Ring,K100 Final Drive O-Ring,K1100 Final Drive O-Ring,K1200 Final Drive O-Ring,R80 Final Drive O-Ring,R100 Final Drive O-Ring,R850 Final Drive O-Ring,R1100 Final Drive O-Ring,R1150 OF-CW130 Crush Washer , Fits Cylinder Head, Engine Housing, Differential Housing, Fork Slider, Lubrication System Oil Cooler/Filter Head, Stanchion, Spring Retainer, Water Hoses, and Gearbox Cover Vehicle Manufacturer: BMW Application: K75, K100, K1 33 17 1 452 504,33171452504,Final Drive Boot,K1 Final Drive Boot,K100 Final Drive Boot,K1100 Final Drive Boot,K1200 Final Drive Boot,R80 Final Drive Boot,R100 Final Drive Boot,R850 Final Drive Boot,R1100 Final Drive Boot,R1150 Final Drive Boot
Magnetic Drain Plug - BMW Airhead, K Bike, Hexhead, Oilhead; 11 13 1 744 329, 11 13 0 007 163 / EnDuraLast
USD Price $12.75

11 13 1 744 329,11131744329,HP2 Oil Drain Plug,K1 Oil Drain Plug,K75 Oil Drain Plug,K100 Oil Drain Plug,K1100 Oil Drain Plug,K1200 Oil Drain Plug,RnineT Oil Drain Plug,R24,R25 Oil Drain Plug,Magnetic drain plug,stainless steel drain plug,R26 Oil Drain Plu