Home > Parts Catalog > Engine & Drivetrain > Clutch > Clutch Pushrods >

Clutch Needle Bearing, BMW Airhead Pre-1980; 23 13 1 232 079 / EnDuraLast
Clutch Needle Bearing, BMW Airhead Pre-1980; 23 13 1 232 079 / EnDuraLast
 
Alternative Views:


Part # ClutchBearing079

Clutch Thrust Needle Bearing 23mm x 6mm x 2mm on pre-1980 models

Vehicle Manufacturer: BMW
Application: BMW Airhead Models
Make/Model: BMW R45, R60, R65, R75, R80, R90, R100
Model Years: 1973 - 1980
Manufacturer Part # :
23 13 1 232 079

(See APPLICATION TABLE tab below to verify vehicle fitment )

Brand:
BMW List Price $30.90
EME Price $17.99
You save $12.91!

Part #: CLUTCHBEARING079
Qty:

Description
Application Table
 
See related products below:

Related Products
Clutch Boot - BMW R Airhead; 21 51 1 230 109 / BMW Clutch Boot Clamp, BMW R Airhead, Oilhead, K Bike; 23 13 1 241 872 / BMW Clutch Boot - BMW R Airhead, Oilhead, K Bike; 23 13 1 338 731 / BMW Clutch Pushrod, BMW Airhead; 23 13 1 232 089 / EnDuraLast
BUY NOW $8.00

Add
BUY NOW $3.99

Add
BUY NOW $35.99

Add
BUY NOW $19.99

Add
21 51 1 230 109,21511230109,R45 clutch boot,R50 clutch boot,R60 clutch boot,R65 clutch boot,R75 clutch boot,R80 clutch boot,R90 clutch boot,R100 clutch boot,R45 clutch bellow,R50 clutch bellow,R60 clutch bellow,R65 clutch bellow,R75 clutch bellow,R80 clut 23 13 1 241 872,23131241872,R45 clamp, R65 clamp,R80 clamp, R100 clamp, R850 clamp, R1100 clamp, K1 clamp, K75 clamp, K100 clamp, K1100 clamp,R45 clutch boot clamp, R65 clutch boot clamp,R80 clutch boot clamp, R100 clutch boot clamp, R850 clutch boot clam 23 13 1 338 731,23131338731,R45 clutch boot, R65 clutch boot,R80 clutch boot,R100 clutch boot,R850 clutch boot,R1100 clutch boot,K1 clutch boot,K75 clutch boot,K100 clutch boot,K1100 clutch boot,R45 clutch rubber boot, R65 clutch rubber boot,R80 clutch ru 23 13 1 232 089, 23131232089, clutch control bmw r100, clutch push rod bmw r100, pushrod bmw airhead, pushrod, clutch push rod bmw Clutch Pushrod & Piston, BMW Airhead  EnDuraLast, pushrod bmw r45, r60, r60/6, r60/7, r65, r75, r75/6, r75/7, r80, r90/6, r9
Final Drive Spline Grease - 15grams / EnDuraLast
BUY NOW $8.50

Add
Better than Staburags NBU 30 PTM, Honda Moly, Loctite anti seize moly, BMW #10, for lubricating spline, final drive, output shaft, as part of the regular maintenance, enduralast, kit