• Cables - 4 gauge copper cable / .380 outside diameter
  • More wire strands than typical battery cables – up to 8 times more
  • 420 wire strands / .011 diameter
  • U.S. A. Made, flexible, 100% stranded high purity copper
  • American-Made copper wire has been smelted and drawn under much cleaner conditions than conventional commercial grade copper
  • Thermoplastic elastomer - Pliable insulation for ease of installation in tight application bends
  • High temperature , oil and abrasion resistant insulation jacket (classic black insulating jacket, with no markings)
  • 600 volt maximum
  • Optimizes current flow efficiency
• Terminals - 100% copper with closed ends
  • Terminals are closed ended seal against the environment
  • Terminal joints are double high pressure crimped to maximize surface contact
  • Pull strength tested 420+ pounds
  • Heat shrink is double thick for water and air tight crimp connection to prevent corrosion and oxidation
  • Dielectric silicone high temperature gel packet provided for corrosion resistance and to promote electrical conductivity
• EnDuraLast 4 Gauge Battery Cables enable all the battery current to efficiently flow to your starter !
  • Most original equipment motorcycle battery cables are only 6 or 8 Gauge
• EnDuraLast Battery Cable is not just a replacement lead;
  • 4 Gauge cable with more wire strands (420) for higher voltage and increased current flow
  • Negative cable from the battery negative terminal (6mm) to engine ground (6mm)

U.S.A. Made high purity copper and U.S.A. assembled from tip to tip and can effectively flow maximum voltage and improve your battery's ability to deliver 300+ amps to your starter for Faster and more Efficient Starting!