Home > C Scooter > Tools & Fasteners >

Pen Type Portable Multimeter / EnDuraLast
EDL-MultimeterPen, Digital Multimeter, multimeter, diode, voltage, current, alternating current, AC,DC, non-contact, testing, circuit test, circuit, continuity, MS8211D, volt meter, voltage meter, ohm meter, diode meter, diode reader, diode tester,
 
Alternative Views:


Part #: EDL-MultimeterPen

The EDL-MultimeterPen is a pen-type digital multimeter with a non-contact AC voltage sensor, it can measure AC/DC Voltage, Current, Resistance, and perform Diode and Continuity tests. Two great feature are the audible tone on contact and built in light for those dark diffuclt areas!

Product Specifications:

DCV: 200m/2/20/200/600V +/-0.7%
ACV: 200m/2/20/200/600V +/-0.8%

Voltage range: 200mV - 600V
Current range: 20mA - 200mA

Capacitance: 2nF - 200μF
Resistance: 200/2k/20k/200k/2M/20M +/-1.2%

Power: 1.5V (AAA) x 2
Temperature range: 64
F to 82F (18C to 28C)
Size: 8.2" x 1.5" x 1.1" (225 x 38 x 26mm)

Includes a durable nylon case with hook and loop fastener.

Requires 2x AAA Batteries - these are NOT included.

Vehicle Manufacturer: ALL
Application: ALL
Make/Model: ALL
Model Years: ALL
Power Rating: Voltage Range: 200mV-600V, Current Range: 20mA - 200mA, Capacitance: 2nF - 200
μF, Resistance: 200/2k/20k/200k/2M/20M +/-1.2%, Power: 1.5V (AAA) x 2, Temperature range: 64F to 82F (18C to 28C), Size: 8.2" x 1.5" x 1.1" (225 x 38 x 26mm)

Brand: 123

EME Price $39.99
BUY NOW $29.99
You save $10.00!

Part #: EDL-MULTIMETERPEN
Qty:

Description
Technical Specs
 

Specifications:

Environmental conditions for use:

  • IEC/EN 61010-1 600V CAT III, Pollution level 2
  • Altitude < 2000 m
  • Working environment temperature and humidity: 0~40C (Do not use when Relative Humidity is below 80% or below 10C)
  • Storage environment temperature and humidity:-10~60C (Remove the battery when relative humidity is below 70%)
  • Temperature coefficient: 0.1x accuracy/C

Maximum voltage allowed between the measuring terminal and ground: DC or AC 600V RMS

Fuse protection: fuse FF250mA/250V

Sampling rate: about 3 times/second

Display: 3 1/2 LCD screen

Super range indication: the LCD screen will display OL

Low battery indication: when the battery voltage is lower than the normal working voltage "" will be displayed on the screen.

Input polarity indication: automatically displays -

Power supply: 2 x 1.5V AAA batteries

Dimensions: 225 x 38 x 26mm


Accuracy Specifications

The accuracy applies within one year after calibration.

Reference conditions: The environment temperature must be between 18C and 28C, with a relative humidity of no more than 80%.


Related Products
Battery Jumper Cables - Any Application / EnDuraLast Hall Sensor Tester (IGNMOD-R284) BMW R Airhead 81-96 / EnDuraLast Dielectric Grease - 5 oz Tube / EnDuraLast 7" Black Zip Tie Cable Strap Pack 25
BUY NOW $14.75

Add
BUY NOW $35.99

Add
BUY NOW $14.99

Add
EME Price $3.50

Add
Jumper cables, bmw, moto guzzi, triumph, Ural, ducati, 8 foot jumper cable, motorcycle jumper cable, jump cable, 84-96308 EDL-HallTester-R284, voltage, current, alternating current, AC,DC, testing, hall sensor, hall sensor test, fault diagnosis, troubleshooting, hall test, hall tester, airhead ignition, bean can, ignition timing, airhead timing, VW, Volkswagen, Opel, BMW dielectric; dielectric grease; dielectric gel; gel; electrical gel; electric; DYNATEX; DYNATEX 1046; silicone gel; silicone grease 7; inch; zip tie; wire; electronics; cable tie; black;
Classic Boxer Charging Book by Rick Jones Posi Tap Assortment kit / Posi Lock
BUY NOW $25.00

Add
EME Price $4.50

Add
Classic BMW Boxer Charging by Rick Jones, Airhead Charging, Airhead Alternator, How To Posi-Lock, Posi, Lock, Connector, Automotive connector, water tight, watertight, automotive electrical, motorcycle electrical, Connection