Home > Airhead > Ignition >

Dual Tower Ignition Coil,Mini - 3.0 Ohms Resistance for Electronic Ignition / Dynatek
dyna coil, coil for bmw motorcycle, coil bmw, 3.0 ohm coil, aftermarket coil for bmw motorcycle, dyna mini coil for bmw, r100 coil, r80 coil, r60 coil, r75 coil, r65 coil, r90 coil, coil for 1990 bmw motorcycle, coil for 1991 bmw motorcycle, aftermarket
 
Alternative Views:


Part #: Dyna-CoilDC1-2

Dynatek 3.0 Ohm Dual Tower mini ignition coil for single plugged engines - replaces 2 canister single tower coils -fits all BMW R Airheads with Electronic Ignition 1981-1995
For use with a digital dwell control ignition only. - Non-Dwell control ignition systems can over charge the coil.

This is a universal coil as supplied by Dynatek. Additional modifications may be required to fit depending on your specific application. Requires mounting bracket not available from Dynatek or Euro MotoElectrics.
This item is NON RETURNABLE.

For direct factory replacement you may care to select the OE coils for your given application.

Note:
This coil is NOT compatible with the DYNA III ignition system.
This coil works well with EnDuraLast digital ignition systems.

Vehicle Manufacturer: BMW, and others
Application: Single Plug Ignition Systems; post-1981 using 3.0 ohm resistance coils and electronic ignition, cannot be used with points or the Dyna III Electronic Ignition System.
Make/Model: BMW
Model Years: BMW - 1981 to 1995 with electronic ignition
Resistance: 3.0 ohms resistance

Part Manufacturer :
EME Price $95.00

Part #: DYNA-COILDC1-2
Qty:

Description
 
Dynatek Coils
These high tech, top quality coils are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. DYNA Coils are made to replace stock coils.
Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used.

FEATURES & BENEFITS:
  • No exposed laminations to rust and degrade performance.
  • High voltage and primary terminals machined from brass.
  • Ultrasonically welded and sealed against moisture.
  • Compact size fits easily under stock covers.
  • Peak gap current in excess of 50mA.
  • High impact thermoplastic housing.
  • Over 40,000 volts per output.
  • Accepts 7 to 8.8mm wires.
  • 1 year warranty.

NOTE: The terminal
RED
dot is the positive terminal.

Related Products
Digital Ignition System - BMW R Airhead with Bosch Alternator / Sachse Premium Silicone Spark Plug Wire Set 18 in / 40 cm, 5k ohm- BMW R Airhead (Late Model) ; 12 12 1 243 453 / EnDuraLast Premium Quality Dual Tower Ignition Coil - BMW Airhead & Moto Guzzi ; 3.0 Ohms Primary Resistance / EnDuraLast Hall Sensor Tester (IGNMOD-R284) BMW R Airhead 81-96 / EnDuraLast
BUY NOW $335.00

Add
BUY NOW $19.99

Add
EME Price $69.00

Add
BUY NOW $35.99

Add
BMW airhead electronic ignition system; bmw airhead digital ignition system; airhead electronic ignition system; airhead digital ignition system; Alpha ignition system; Omega Ignition System; Volker Sachse Electronik 12 12 1 243 453, 12121243453, BMW Airhead ignition cable, BMW R Airhead ignition cable, BMW Airhead spark plug wire set, BMW R Airhead ignition cable, Eurotech motorsports, PW8595, PW7084, PW5169, spark plug wire bmw r45, spark plug wire bmw r80, spark pl dyna coil, coil for bmw motorcycle, green coil bmw, 3.0 ohm coil, aftermarket coil for bmw motorcycle, dyna green coil for bmw, r100 coil, r80 coil, r60 coil, r75 coil, r65 coil, r90 coil, coil for 1990 bmw motorcycle, coil for 1991 bmw motorcycle, afterm EDL-HallTester-R284, voltage, current, alternating current, AC,DC, testing, hall sensor, hall sensor test, fault diagnosis, troubleshooting, hall test, hall tester, airhead ignition, bean can, ignition timing, airhead timing, VW, Volkswagen, Opel, BMW