Mini Hall Sensor Tester BMW

Home > K Bike > Engine & Drivetrain > Engine > Timing >

Mini Hall Tester BMW K75, 100, 1100; EnDuraLast

BOSCH Hall Effect Sensor replacement tester, BMW K75, K100, K1100, hall effect trigger sensor

Part #: EDL-MiniHT-K033-049

Testing and setting device for a Hall sensor on BMW K1, K75, K100, K1100.

Vehicle Manufacturer: BMW K
Application: Fits ALL K1, K75, K100, K1100 1983-1999
Make/Model: BMW K: K1, K75, K100, K1100
Model Years: ALL
Manufacturer #: (Works in conjunction with 12 11 1 449 049 / 12 11 1 459 033 Hall Sensors)

(See APPLICATION TABLE tab below to verify vehicle fitment )

Brand:

Made In Germany

USD Price $59.99

Quantity in Stock:10

Part #: EDL-MINIHT-K033-049

Quantity:

Description

Application Table

Setting timing by ear can be tricky - this tool makes setting your timing simple and accurate.

Ensure that the flywheel is at just before TDC. The tester light will come on precisely at the correct ignition point before TDC when you rotate the engine counter clockwise.

Operating Instructions:

Unplug the Hall Trigger Sensor from the wiring harness
Ensure that the piston is locked at Top Dead Center.
Insert the Hall Tester in line between the hall sensor and the factory harness
Power is supplied by the vehicles electrical system.
Rotate the hall sensor plate to the point where the LED turns on - indicating the point of ignition.
Note that if the light stays on a little whilst rotating the hall sensor plate then the precise point of ignition is at the very point where it turns off again - slightly more curate. The LED will only displays the switching status of the #1 sensor or TDC, Not BDC
Be advised that working on the ignition requires special precautions due to very high voltages - always see a professional if you encounter problems