Join our mailing list!


  Home > Battery & Cables > Battery > East Penn Deka >

  Battery 12V/26AH - BMW R Airhead, K, Moto Guzzi / Deka AGM



 
Alternative Views:


BAT-ETX30L
Our Price $119.95
Add to Shopping Cart to Purchase at SALE PRICE !

Stock Status:In Stock
Part #: BAT-ETX30L


BAT-Bolt:
Battery Bolts (x2) [Add $4.25]

Qty:  
Description Technical Specs Extended Info
 
Part #: BAT-ETX30L

Deka Sports Power AGM (Absorbed Glass Mat) 12 Volt, 26 Amp/Hour battery. Factory sealed, valve-regulated maintenance free design eliminates damage from acid spills and corrosion. Deka batteries are manufactured under strict quality controls to assure superior performance and long life. CCA 400


NOTE: These batteries will NOT fit within a USPS Flat-rate box. If a flat-rate option is chosen your battery will ship separately and additional charges will be added to your order.

Vehicle Manufacturer: BMW, MG, Kawasaki (see extended info tab)

Application: ALL BMW R 2 valve Airheads w/ large battery tray, K75, K100, K1100 w/ ABS1
or w/o ABS up to 09/1992
California 111, Convert, Daytona, LeMans, Mille, 1000NT, Quota, 1100 California, Special, Jackal, Stone, EV, V11 Bassa, V11 EV
(see extended info tab for more specific application details)

NOTE:
BMW K OE batteries are slightly smaller than our aftermarket replacements and may require 185 mm bolts (x 2) to fasten the battery down.
refer to BAT-BOLT

Make/Model: BMW : Airhead, K / MG / Kawasaki (see extended info tab)

Model Years: BMW 1969-1995, Moto Guzzi 1989-2003

Vehicle Mfg. Part #: 61 21 1 459 650

Power Rating: 12 Volt, 26 Amp/Hour, CCA 400


Brand:  

Dimensions:

Height
: 6 7/8 Inches / 175 mm
Length : 6 5/8 Inches / 168 mm

Width : 5 3/16 Inches / 131 mm


Technical Information: AGM (Absorbed Glass Mat) technology.
  • 100% tested ultrapremium sealing valve; prevents corrosion of cosmetic parts from sulfuric acid.
  • Exclusive gel electrolyte includes sulfuric acid, fumed silica, pure demineralized, deionized water, and a phosphoric acid additive that prevents crystallization of electrolyte.
  • East Penn is the only battery manufacturer to use tank formation to activate battery plates. This guarantee's a formed and voltage matched plate.
  • Calcium positive and negative full-frame power path grids provide the highest cranking amps and the lowest self-discharge rates for off season storage.
  • High density oxide provides maximum power-per-pound for dependable "high cycling" service.
  • Front or top threaded holes for ease of cable installation.
  • Stainless steel terminal bolts eliminate rust and corrosion.
  • CCA 400
  • 24 month warranty

Learn more about AGM batteries here.

Lead acid batteries have a predictable service life, defined by,

A) The length of storage prior to being put into service &

B) How the voltage is maintained in storage prior to being put into service.

A battery will sulfate when proper voltage, is not maintained, thus shortening the battery's useful life. Euro MotoElectrics batteries are fresh from battery factory production! Prior to shipping to our customers we maintain our batteries on a workshop Deltran Battery Tender . Our 10-bank Deltran Battery Tender fully charges EME batteries and maintains proper storage voltage until it goes out for shipment. The Battery Tender uses BTP Microprocessor Technology and performs 4-step Charging to properly charge each battery to optimum voltage. Historically, the results of laboratory and field testing have shown that keeping batteries fully charged is better for the battery and helps the battery achieve longer service life. EME batteries are delivered fresh and assured an extended service life.

1. Initialization: Monitor Circuit verifies appropriate battery voltage levels and good electrical continuity between the battery and the charger DC output.

2. Bulk Charge: Constant Current at Full Power. Bulk Charge ends at approximately 75% to 80% of full battery recharge.

3. Absorption Charge: Constant Voltage at Absorption Level. This conditions the battery for optimum performance. Absorption charge ends when the battery charging current drops below the optimum recharge threshold or the absorption timer expires.

4. Float Charge: Constant Voltage at Float / Maintenance level. Keeps battery fully charged and maintains high specific gravity. Full charge reset monitor protects battery against excessive appliance current draw while charging. Float charge continues indefinitely.Your battery is susceptible to damage if overcharged/undercharged. We recommend the use of a voltage regulated battery charger having on charge voltage, at room temperature, at or between 14.4 to 14.6 volts at 68°F (20°C). The only way to determine state of charge of your battery is with a voltmeter.

Read more about battery health and testing here.

Battery Voltage

State of Charge / Battery Condition

Recommended Action

12.7 V

100 %

 

12.6 V

90%

 

12.4 V

75 %

Charge Battery + retest

12.2 V

50 %

Replace Battery

12.0 V

25 %

Replace Battery

11.9 V or less

discharged

Replace Battery

Read more about battery health and testing here.

Accessories for this product...
Battery - R Airhead, K, Moto Guzzi; BAT-12V30
Battery Cable Kit - BMW R Airhead; BCK-475473
Our Price $19.75

Add
Battery - BMW R Aihread and K; BAT-ETX14L

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Battery & Cables > Battery > East Penn Deka
BMW ( ALL )
BMW R Airhead (2-valve)
BMW K
BMW R Oilhead (4-valve)
BMW R Hexhead
Battery & Cables > Battery Cables
Battery & Cables > Battery
Battery & Cables
Moto Guzzi